36 DCA Vantage Operator’s Guide
Installation
Setting the Subnet Mask
Use the Subnet Mask screen to enter the subnet mask for the system.
1. At the Ethernet Port menu, select
Subnet Mask.
2. Use the numeric keypad to enter the subnet mask.
3. To save the subnet mask, select
Save.
The Ethernet Port menu displays.
Entering a Domain Name Server
Use the Domain Name Server screen to enter the Domain Server Name for
the system.
1. At the Ethernet Port menu, select
Domain Server Name.
2. Select
Domain Name Server.
3. Use the alphanumeric keypad to enter the DNS.
4. To save the domain server name, select
Save.
The Ethernet Port menu displays.
Entering the Default Gateway
Use the Default Gateway screen to enter the default gateway for the system.
1. At the Ethernet Port menu, select
Default Gateway.
2. Use the numeric keypad to enter the default gateway.
3. To save the default gateway, select
Save.
Setting up the Remote Computer
Use the Remote Computer screen to enter the IP address or host name for the
remote computer. After you enter the IP address or host name, you can
communicate with the remote computer over the network.
1. At the Ethernet Port menu, select
Remote Computer.
2. Select
Remote Computer.
3. Use the alphanumeric keypad to enter one of the following for the remote
computer:
• IP address
• host name
4. To save the remote computer, select
Save.
Setting the Port Number
Use the Port Number screen to enter the port number for the system.
1. At the Ethernet Port menu, select
Port Number.
To Next Page
Loading...
