EasyManua.ls Logo

Siemens DCA Vantage - Removing the Reagent Cartridge

Siemens DCA Vantage
214 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62 DCA Vantage Operator’s Guide
Operating the System
A supervisor (that is, a Level 1 operator) can designate the required primary
and optional secondary HbA
1c
reporting units for printing data. Based on this
setting, the system displays the appropriate primary, and optional secondary
HbA
1c
reporting units. See Designating the Primary and Secondary HbA1c
Reporting Units‚ page 153.
NOTE: You can print, enter, or edit the sample data while the results are
displayed.
Removing the Reagent Cartridge
When the tests are complete, remove the reagent cartridge from the system.
1. Open the cartridge compartment door.
2. Locate the button on the right side of the cartridge compartment.
3. Push and hold it down with your right hand.
4. With your left hand, gently push the tab on the cartridge to the right.
This action releases (unlocks) the cartridge.
Figure 16 Removing the Reagent Cartridge
1
Reagent Cartridge
2
Release Button

Table of Contents

Related product manuals