76 DCA Vantage Operator’s Guide
Operating the System
Recalling Patient Tests
Use the Patient Tests menu to access data for HbA
1c
or Microalbumin/
Creatinine test, or to export data to an external storage device via the USB
port.
NOTE: If there is an asterisk next to the result percent, this indicates that the
results were user corrected.
Viewing the Last 10 Patient Tests
Use the View Last 10 patient test screens for HbA
1c
and Microalbumin/
Creatinine to view the last 10 test results performed at the system. The sort
order starts with the most recent test performed.
1. From the Home screen, select
Recall.
2. From the Recall menu, select
Patient Tests.
3. Select one of the following types of patient tests:
• To view HbA
1c
patient test results, select HbA1c.
• To view microalbumin/creatinine patient test results, select
Microalbumin/Creatinine.
4. Select View Last 10.
The last 10 patient tests display.
You can delete patient tests at this screen by performing the following steps:
1. While viewing the patient tests, select a test.
The patient test is highlighted.
2. Select
Delete.
A message displays verifying that you want to delete the patient test result.
3. Select
OK.
4. Delete all of the last 10 patient tests, if needed:
a. Select
Delete All.
A message displays verifying that you want to delete all of the last 10
patient tests.
b. Select
OK.
Searching for a Patient ID or Name
Use the Patient ID/Name screen to search by either patient ID number or
name.
NOTE: To use the search feature, this option is configured in System Settings,
Additional Settings.
1. From the Home screen, select Recall.
2. From the Recall menu, select
Patient Tests.
To Next Page
Loading...
