DCA Vantage Operator’s Guide 111
Maintenance
Loading Paper on the Onboard Printer
1. Ensure the system is at the Home screen.
2. Turn the system so that you are looking at the back.
3. Use the tab to lift the cover off.
4. Lift the paper feeder up.
5. Push the plastic paper cover down.
6. Remove the paper roll:
a. Lift up the roll.
b. Tear the paper between the roll and the printer.
c. Remove the core and remaining paper on the roll.
7. Remove any paper remaining in the printer:
a. Locate the printer paper release lever.
This lever is colored dark gray and is located on the right of the printer
when looking at the front of the system.
CAUTION
Do not touch the printer without observing precautions for handling
electrostatic sensitive devices. A risk of electrostatic discharge to the
system exists when touching the printer.
WARNING
Be careful when touching the printer. It may be hot causing bodily
injury.
To Next Page
Loading...
