Siemens DCA Vantage - Editing an Operator; Displaying an Operator; Deleting an Operator

44 DCA Vantage Operator’s Guide
Operating the System
Editing an Operator
You can change the Operator ID, access code, and level for an operator.
1. At the Home screen, select
Menu.
2. Select
System Settings from the Menu screen.
3. At the System Settings menu, select
Additional Settings.
4. Select
General.
5. Select
System Access.
6. At the System Access menu, select
Operators.
The Operators screen displays.
7. Highlight the operator you want to edit.
8. Select
Edit.
9. Edit the Operator ID or the Access code with the keypad or external
barcode reader.
10. Select
Save.
Displaying an Operator
1. At the Home screen, select Menu.
2. Select
System Settings from the Menu screen.
3. At the System Settings menu, select
Additional Settings.
4. At the Additional Settings menu, select
General.
5. Select
System Access.
6. At the System Access menu, select
Operators.
A list of operators displays.
Deleting an Operator
1. At the Home screen, select Menu.
2. Select
System Settings from the Menu screen.
3. At the System Settings menu, select
Additional Settings.
4. At the Additional Settings menu, select
General.
5. Select
System Access.
6. At the System Access menu, select
Operators.
A list of operators displays.
7. Highlight the Operator ID you want to delete.
8. Select
Delete.
A message displays verifying that you want to delete the Operator ID.