Siemens DCA Vantage - Setting the Date Format and Current Date; Setting the Sequence Number Options

162 DCA Vantage Operator’s Guide
Customizing the System
6. Select a time format:
• 12 hour
• 24 hour
7. Use the up and down arrows to select the hour and the minutes.
8. Select AM or PM.
NOTE:You only have this option if you select a 12-hour time format.
9. To save the time setting, select
Save.
Setting the Date Format and Current Date
Use the Date screen to set the date format and the current date.
1. At the Home screen, select
Menu.
2. Select
System Settings from the Menu screen.
3. At the System Settings menu, select
Additional Settings.
4. At the Additional Settings menu, select
General.
5. Select
Date.
6. Select a date format:
• MM/DD/YYYY
• DD.MM.YYYY
• YYYY.MM.DD
7. Use the up and down arrows to select the Month, Day, and Year.
8. To save the date format, select
Save.
Setting the Sequence Number Options
Use the Sequence Number screen to specify whether the sequence number
resets, and whether the sequence number displays.
1. At the Home screen, select Menu.
2. Select
System Settings, from the Menu screen.
3. At the System Settings menu, select
Additional Settings.
4. At the Additional Settings menu, select
General.