DCA Vantage Operator’s Guide 29
Installation
Installing the Hardware and External Devices
If you are connecting an external printer, computer, or LIS system to the
DCA Vantage system, you must configure the DCA Vantage system software
before connecting the external hardware. Refer to Configuring Connectivity‚
page 32.
Installing the External Barcode Reader
If you ordered an external barcode reader, it is supplied in addition to the
internal barcode reader. Refer to Appendix F, Installing the External Barcode
Reader.
Installing Printers
Use the Printers menu to perform the following tasks:
• enable/disable the onboard and external printer
• configure the onboard and external printer
• enter a customized report header that displays on printed reports
• reset printer defaults
• select the report type
1
Ethernet Port (RJ 45)
2
USB Port
3
Barcode Reader
4
Serial Port (RS 232)
To Next Page
Loading...
