DCA Vantage Operator’s Guide 75
Operating the System
4. With your left hand, gently push the tab on the cartridge to the right.
This action releases (unlocks) cartridge.
Figure 24 Removing the Reagent Cartridge
5. Pull the cartridge out of compartment.
6. Close the system door.
7. Discard the cartridge in a proper container, according to your standard
laboratory procedures.
Recalling Patient Data, Control Tests, and
Calibration Data
Use the Recall Menu to access patient tests, control tests, and calibration
data. You can restrict edit and delete functionality in the Recall menu in
System Settings. Refer to Customizing the System‚ page 151.
The Enter Access Code screen displays when you attempt to access the
Recall Menu if system access is set to Fully Restricted in System Settings. If
System Access is set to Unrestricted, Restricted, or Restricted Plus, this
screen does not display.
NOTE: The default security setting is set to Off so that an access code is not
required
.
1
Reagent Cartridge
2
Release Button
To Next Page
Loading...
