164 DCA Vantage Operator’s Guide
Customizing the System
2. Select System Settings, from the Menu screen.
3. Select
Display.
4. Use the up and down arrows to adjust the contrast of the color display.
5. Select
Save.
The system display is set.
Viewing the Current System Settings
You can view the system settings including serial number, software version
number, patient test settings, patient printed report type, control test settings,
reminders, time format, and MAC address.
See System Settings Report‚ page 188 for a complete list of the contents of a
full and a partial printed System Settings report.
Viewing and Printing a Partial System Settings Report
To print a partial System Settings Report, perform the following steps:
1. At the Home screen, select Menu.
2. Select System Settings from the Menu screen.
3. To view the partial Systems Settings Report, select View Settings.
The View Settings screen displays the current system settings.
4. To print the current system settings, select Print.
Printing a Full System Settings Report
To print a full System Settings Report, perform the following steps:
1. At the Home screen, select Menu.
2. Select System Settings from the Menu screen.
3. Select
Additional Settings from the System Settings screen.
4. Select
Print.
Customizing Printed Report Headers
You can optionally specify a 1- or 2-line header that appears on all printed
reports. Each line can be up to 24 characters long.
1. At the Home screen, select System Settings.
2. At the System Settings menu, select
Additional Settings.
3. At the Additional Settings
menu, select Printers.
4. Select
Report Headers.
5. Select
Line 1.
To Next Page
Loading...
