78 DCA Vantage Operator’s Guide
Operating the System
Searching within a Specific Date Range
Use the Start Date and End Date screens to set the start and end dates when
you want to search by a specific date range.
1. At the Home screen, select
Recall.
2. From the Recall menu, select
Patient Tests.
3. Search for one of the following:
• To search within a specific date range for an HbA
1c
patient test result,
select
HbA1c.
• To search within a specific date range for a microalbumin/creatinine
patient test result, select Microalbumin/Creatinine.
4. Select Date Range.
The Start Date screen displays.
5. Use the up and down arrows to select the Month, Day, and Year.
6. Select
Next.
The End Date screen displays.
7. Use the up and down arrows to select the Month, Day, and Year.
8. Select
Next.
The search results display.
To delete a patient test from the date range results:
1. Highlight the test.
2. Select
Delete.
A message displays verifying that you want to delete the patient tests.
3. Select
OK.
4. To delete all the patient tests select
Delete All.
A message displays verifying that you want to delete all the patient tests.
NOTE: Only the tests that are recalled in the search are deleted.
5. Select OK.
Searching by Result Range
Use the Set Lower Limit screen to set the lower HbA
1c
value when you search
by result range.
1. At the Home screen, select Recall.
2. From the Recall menu, select
Patient Tests.
3. Select
HbA1c.
The HbA
1c
Patient Test screen displays.
To Next Page
Loading...
