DCA Vantage Operator’s Guide 79
Operating the System
4. Select Result Range.
The Lower Limit screen displays.
5. Use the up and down arrows to set a HbA
1c
value.
NOTE: For NGSP only, the lower limit cannot be lower than 2.0%.
6. Select
Next.
The search results display.
Viewing the HbA
1c
Results in Graph Format
You can view the HbA
1c
test results in a graph format. You can search by
patient ID and then narrow the search by using a date range.
NOTE: Recalled results and trend graphs adapt to your configured Reporting
Units, Patient Reference Range, and User Corrections.
1. At the Home screen, select
Recall.
2. From the Recall menu, select
Patient Tests.
3. Select
HbA1c.
The HbA
1c
Patient test List screen displays.
4. Select
Graph.
5. Use the keypad or external barcode reader to enter a Patient ID.
6. Select
Next.
All HbA
1c
results that match the patient ID are graphed.
7. To change the graph date range, select
Change.
8. To print the graph to an external printer, select
Print.
NOTE: The internal printer does not support printing graphs.
Viewing Patient Test Results
Use the Patient Test Result screen to view information about a specific patient.
1. At the Home screen, select
Recall.
2. From the Recall menu, select
Patient Tests.
3. Select one of the following:
• To view patient results for an HbA
1c
patient test result, select HbA1c.
• To view patient results for an microalbumin/creatinine patient test
result, select Microalbumin/Creatinine.
4. Select View Last 10.
NOTE: You can view patient results from any search finding.
To Next Page
Loading...
