Siemens DCA Vantage - Inserting Capillary Holder into the Reagent Cartridge

DCA Vantage Operator’s Guide 89
Quality Control
Quality Control
Inserting Capillary Holder into the Reagent Cartridge
1. Place the capillary holder in the correct position to insert it into the reagent
cartridge.
2. Insert the capillary holder into the reagent cartridge until the holder gently
snaps into place.
Figure 27
Figure 28 Inserting Capillary Holder into Reagent Cartridge
CAUTION
Avoid harsh insertion of capillary holder. Do not dislodge the sample
in the glass capillary because erroneous results may occur.
1
Capillary holder
2
Reagent cartridge