30 DCA Vantage Operator’s Guide
Installation
• specify whether a report automatically prints to the onboard printer or
external printer, if enabled, or both, when the result displays
• specify the number of copies of the report that you want to print
Setting up the Onboard Printer
1. At the Home screen, select
System Settings.
2. At the System Settings menu, select
Additional Settings.
3. At the Additional Settings
menu, select Printers.
4. Select
Onboard Printer.
The Onboard Printer screen displays.
• To enable the onboard printer, select
Enable.
• To disable the onboard printer, select
Disable.
5. To automatically print the test results, select Automatically print.
NOTE: You must select Enabled to automatically print.
6. Use the up and down arrows to select the number of copies of the report
you want to print.
7. To save the onboard printer setting, select
Save.
Setting up the External Printer
The DCA Vantage system supports only Printer Command Language (PCL)
type printers for external printers. Network printers are not supported.
1. At the Home screen, select System Settings.
2. At the System Settings menu, select
Additional Settings.
3. At the Additional Settings
menu, select Printers.
4. Select
External Printer.
• To enable the external printer, select
Enable.
• To disable the external printer, select
Disable.
5. To automatically print the test results, select Automatically print.
NOTE: You must select Enabled to automatically print.
6. Use the up and down arrows to select the number of copies of the report
you want to print.
7. To save the external printer setting, select
Save.
8. Connect the printer cable to the USB port on the DCA Vantage system and
to the external printer.
9. Power on the printer.
To Next Page
Loading...
