Siemens DCA Vantage - Searching for a Specific Comment

DCA Vantage Operator’s Guide 77
Operating the System
3. Search for one of the following:
• To search for patient ID or name for an HbA
1c
patient test result, select
HbA1c.
• To search for patient ID or name for a microalbumin/creatinine patient
test result, select Microalbumin/Creatinine.
4. Select Patient ID/Name.
5. Enter the patient ID or patient name that you want to find with the keypad
or external barcode reader.
Use the percent (%) character as the wildcard for searching.
6. Select
Next.
The search results display.
7. Delete a patient test, if needed:
a. Select the test.
b. Select
Delete.
A message displays verifying that you want to delete the patient test
result.
c. Select
OK.
8. Delete all of the patient tests, if needed:
a. Select
Delete All.
A message displays verifying that you want to delete all the patient
tests.
NOTE: Only the tests that are recalled in the search are deleted.
b. Select
OK.
Searching for a Specific Comment
Use the Comment 1 screen to search for a specific comment.
1. At the Home screen, select
Recall.
2. From the Recall menu, select
Patient Tests.
3. Search for one of the following:
• To search for a specific comment for an HbA
1c
patient test result, select
HbA1c.
• To search for a specific comment for a microalbumin/creatinine patient
test result, select Microalbumin/Creatinine.
4. Select
Comment 1.
5. Enter the comment using the keypad or external barcode reader.
6. Select
Next.
The search results display.