DCA Vantage Operator’s Guide 25
Installation
2 Installation
This section provides detailed installation instructions for the DCA Vantage
system. Follow the installation steps correctly to ensure proper installation,
operation, and service.
Hardware Installation
Place the system where it will not be subjected to extreme temperature
variations. Avoid proximity to open windows, direct sunlight, ovens, hot plates,
open burners, radiators, and dry ice baths.
Do not place the DCA Vantage system on the same bench as a source of
vibration.
Provide bench space large enough to allow free air circulation around the
system (8 cm/3 inches on all sides).
Unpacking the System
Your DCA Vantage system is delivered in 1 shipping carton.
1. Carefully remove the contents of the shipping carton.
2. Inspect the carton and system for visible signs of damage.
3. If damage to the system exists, immediately file a complaint with the
carrier.
4. Make sure all items are included with your system, and keep them for
future use.
• DCA Vantage system
• Cleaning Kit
• Optical Test Cartridge (in system cartridge compartment)
• Power Cord for your region
• Air Filter Replacement Kit
• Spare Fuses
•HbA
1c
Quick Reference Guide
• Microalbumin/Creatinine Quick Reference Guide
CAUTION
Do not drop or handle the system roughly. This can disturb internal
calibrated optics and electronics or cause other damage. Always
handle the system with care. The DCA Vantage system is a
precision system and must be handled accordingly.
To Next Page
Loading...
