Siemens DCA Vantage - Setting Patient and Control Test Delete Options; Setting Control Test Options; Setting Control Tests Data Entry

158 DCA Vantage Operator’s Guide
Customizing the System
1. At the Home screen, select Menu.
2. Select
System Settings from the Menu screen.
3. At the System Settings menu, select
Additional Settings.
4. At the Additional Settings menu, select
Patient Tests.
5. At the Patient Tests menu, select
Patient Recall List Options.
6. Select one of the following options:
• Last Name
• Patient ID
7. To save the settings, select Save.
Setting Patient and Control Test Delete
Options
Use the Storage Mode screen to specify how to delete patient and control test
data from the system. You can select to automatically delete tests based on a
first in, first out basis, or you can manually delete a test.
1. At the Home screen, select
Menu.
2. Select
System Settings, from the Menu screen.
3. At the System Settings menu, select
Additional Settings.
4. At the Additional Settings menu, select
General.
5. Select
Storage Mode.
6. To automatically delete patient and control test data on a first in, first out
basis, select Automatic Deletion (First In, First Out).
7. To manually delete patient and control test data, select
Manual Deletion.
8. To save the storage mode, select
Save.
Setting Control Test Options
Use the Control Test screen to perform the following tasks:
• specifying the data entered when a control test is run
• viewing the control test log and schedule
• modifying the control test reminder schedule
Setting Control Tests Data Entry
Use the Control Tests Data Entry screen to specify the data and comments
you enter when you run a control test, and what data is required or optional.
Only the data you select as optional displays. If you select Required, you have
to enter a value for that specific data before you can exit the screen.