20 DCA Vantage Operator’s Guide
Overview
System Menu
Select Menu from the Home screen to access Control Tests, System
Maintenance, System Settings, and System Tests. You can also schedule and
change the configuration of control tests.
Table 2 Menu
Additional Settings
Select
Additional Settings from the System Settings screen to customize the
system and add external devices.
MicroAlbumin View Last 10 see the last 10 results performed.
Patient ID/Name
search by Patient ID or last name. The sort
order is the reverse order in which the tests
were run. If a Patient ID or Last Name is not
entered for the patient, the field will be blank.
You also can delete test results. You can use
a wildcard (%) character in the recall search.
Date Range
enter a Start and End Date to search patient
results for a specific time period.
Comment 1
search by the first comment of the up to 8
available comments. To perform a wildcard
search, use the percent (%) sign at the end
the entry.
Export
copy data to a USB storage device.
Select . . . to . . .
Control Tests
see a read-only status of required and
optional Control tests. Select
Log to see up
to 100 entries.
System Maintenance
view the list of maintenance tasks and the
status of each one. A task that has been
performed can be selected and marked as
complete on this screen. This task also
appears on the System Maintenance Log
screen.
System Settings
change sound volume, adjust the display
contrast, access Additional Settings menu,
and view current settings.
System Tests
perform system tests including testing
printers, barcode readers, external ports,
optical tests, and calibrating the touchscreen.
Select . . . then . . . to . . .
To Next Page
Loading...
