154 DCA Vantage Operator’s Guide
Customizing the System
The following tables show the allowable reporting units selections on this
screen:
• Table 6 on page 154 shows the reporting units settings available when
Japanese mode is set to Off.
• Table 7 on page 154 shows the reporting units settings available only
when Japanese mode is set to On.
Table 6 HbA
1c
Reporting Units Settings, Japanese Mode Off
Table 7 HbA
1c
Reporting Units Settings, Japanese Mode On
NOTE: When you select JDS, the display and printout show the units of the
results as HbA
1c
(JDS). If you select NGSP, the display and printout show the
units of the results as HbA
1c
(NGSP).
Primary Secondary
IFCC None
IFCC NGSP
IFCC mono-S
NGSP None
NGSP IFCC
NGSP mono-S
mono-S None
mono-S IFCC
mono-S NGSP
Primary Secondary
NGSP None
NGSP JDS
NGSP IFCC
JDS None
JDS NGSP
JDS IFCC
IFCC None
IFCC NGSP
IFCC JDS
To Next Page
Loading...
