196 DCA Vantage Operator’s Guide
External Barcode Reader
NOTE: Do not scan the barcodes in the barcode-reader manufacturer’s Quick
Start Guide. The DCA Vantage system does not require this installation step.
1. At the Home screen, select
Menu.
2. From the Menu screen, select
System Tests.
3. Select
User System Tests.
4. Select
External Barcode Reader.
5. Select
Start.
6. Follow the prompts to scan a barcode to complete the test.
You can test the function of the barcode scanner for each supported
symbology by scanning the following barcodes or by printing them on a
high-quality printer.
Code 39 Check Digit On
Code 39 Check Digit Off
I2of5 Check Digit On
I2of5 Check Digit Off
Code 128
Code 93
To Next Page
Loading...
