Siemens DCA Vantage - Page 23

DCA Vantage Operator’s Guide 23
Overview
Overview
Restore Settings
copy saved settings from the USB device to
the DCA Vantage system. Existing settings
are overwritten.
Install Software
install new software from a USB device to the
DCA Vantage system.
Printers Onboard Printer
enable or disable the onboard printer. You
can specify whether reports print
automatically and number of copies.
External Printer
enable or disable an external printer. You can
specify whether reports print automatically
and number of copies.
Report Headers
create a customized report header that
appears on printed reports.
Report Type
select whether to print a full report or a short
(partial) report (for faster printing).
Reset Printer
Defaults
return the printer settings to the factory
settings.
External
Barcode
Reader
disable or enable the external barcode
reader and select the barcode symbology.
Connectivity
select serial or Ethernet port, choose data
transmission protocol, and configure port
settings.
HbA1c
Reporting
Units
specify the primary (required) and secondary
(optional) reporting units in calculating and
displaying the HbA
1c
value.
Export Log save error log data to a USB device.
Activate
provide optional capability that is only
actionable with an activation code provided
by Siemens Healthcare Diagnostics.
Factory
Settings
provides authorized service personnel
access to screens used to view or set
options.
Select . . . then . . . to . . .