Siemens FC300 - Page 121

Note
Bargraph
The bargraph limits are defined as the lower and upper alarm values.
One value and graph
2
1
3
① Process Value
② Graph
③ Instruction Press to freeze/unfreeze display
Six values
2
4
1
3
)&66
5
6
① First process value The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
② Second process value The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
③ Third process value The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
④ Fourth process value The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
⑤ Fifth process value The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
⑥ Sixth process value The user-defined process value to be displayed is configured in menu
"View" (1-6) located at "Setup" → "Display"
Operating MASS 2100/FC300 with FCT030
7.2 Operating instructions
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 121