Siemens FC300 - Page 132

Parameter list edit view
Lists of parameters in edit view are displayed as shown here.
2
4
1
3
① Parameter list
② Parameter name
③ Parameter item number
④ Help text describing the parameter function. The help text appears if no key is pressed for three
seconds.
Figure 7-8 List Selection edit view
Select the value by using
and keys, and press to confirm changes. Press to escape
the view without changing the value.
Parameter list read only view
Lists of parameters in read only view are displayed as shown here.
4
2
1
3
① Parameter value selected
② Parameter name
③ Parameter item number
④ Help text describing the parameter function. The help text appears if no key is pressed for three
seconds.
Figure 7-9 List selection read only view
The read only view is shown if you do not have access to edit parameters. Press to escape
the view.
Operating MASS 2100/FC300 with FCT030
7.2 Operating instructions
MASS 2100 & FC300 (FCT030)
132 Operating Instructions, 06/2017, A5E39789040-AA