Siemens FC300 - Page 197

ID/
Icons
Diagnostic Action Comment
119 Fraction B % Value below alarm limit. Check process condi‐
tions. Align Lower alarm limit to normal process
conditions.
120 Fraction A flow Value above alarm limit. Check process condi‐
tions. Align Upper alarm limit to normal process
conditions.
121 Fraction A flow Value above warning limit. Check process con‐
ditions. Align Upper warning limit to normal
process conditions
122 Fraction A flow Value below warning limit. Check process con‐
ditions. Align Lower warning limit to normal
process conditions.
123 Fraction A flow Value below alarm limit. Check process condi‐
tions. Align Lower alarm limit to normal process
conditions.
124 Fraction B flow Value above alarm limit. Check process condi‐
tions. Align Upper alarm limit to normal process
conditions.
125 Fraction B flow Value above warning limit. Check process con‐
ditions. Align Upper warning limit to normal
process conditions
126 Fraction B flow Value below warning limit. Check process con‐
ditions. Align Lower warning limit to normal
process conditions.
127 Fraction B flow Value below alarm limit. Check process condi‐
tions. Align Lower alarm limit to normal process
conditions.
Diagnosing and troubleshooting
10.2 Fault codes and corrective actions
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 197