Siemens FC300 - Page 196

ID/
Icons
Diagnostic Action Comment
110 Medium temperature Value below warning limit. Check process con‐
ditions or align limit to normal operation. Adjust
parameter 'Lower warning limit'
111 Medium temperature Value below alarm limit. Check process condi‐
tions or align limit to normal operation. Adjust
parameter 'Lower alarm limit'
112 Fraction A % Value above alarm limit. Check process condi‐
tions. Align Upper alarm limit to normal process
conditions.
113 Fraction A % Value above warning limit. Check process con‐
ditions. Align Upper warning limit to normal
process conditions
114 Fraction A % Value below warning limit. Check process con‐
ditions. Align Lower warning limit to normal
process conditions.
115 Fraction A % Value below alarm limit. Check process condi‐
tions. Align Lower alarm limit to normal process
conditions.
116 Fraction B % Value above alarm limit. Check process condi‐
tions. Align Upper alarm limit to normal process
conditions.
117 Fraction B % Value above warning limit. Check process con‐
ditions. Align Upper warning limit to normal
process conditions
118 Fraction B % Value below warning limit. Check process con‐
ditions. Align Lower warning limit to normal
process conditions.
Diagnosing and troubleshooting
10.2 Fault codes and corrective actions
MASS 2100 & FC300 (FCT030)
196 Operating Instructions, 06/2017, A5E39789040-AA