Siemens FC300 - Page 418

HMI menu ID Parameter Description Default value
[unit]
value range Access
level
2.8.9.6 4th value Select the fourth value for the
view.
Volume flow
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
2.8.9.7 5th value Select the fifth value for the view. Mass flow
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
2.8.9.8 6th value Select the sixth value for the
view.
Totalizer 2
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
2.8.9.9 Graph Scale Mode Select the scaling mode. Auto‐
matic scaling or fixed scaling us‐
ing “Graph Scale Lower Limit”
and “Graph Scale Upper Limit”.
Auto
● Auto
● Fixed
User
Default settings
B.8 Local display
MASS 2100 & FC300 (FCT030)
418 Operating Instructions, 06/2017, A5E39789040-AA