Siemens FC300 - Page 417

HMI menu ID Parameter Description Default value
[unit]
value range Access
level
2.8.9.3 1st value Select the first value for the view. Totalizer 1
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
2.8.9.4 2nd value Select the second value for the
view.
Density
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
2.8.9.5 3rd value Select the third value for the
view.
Medium temper‐
ature
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Medium
temperature
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
User
Default settings
B.8 Local display
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 417