Siemens FC300 - Page 430

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.2.7.8 Device events If one of the selected events ap‐
pears this affects the status
icon, the related status output,
and the alarm on the communi‐
cation interface.
● 148 Transm.
Temp. above
alarm limit
● 149 Transm.
Temp. below
alarm limit
● 150 Sensor
signal
disrupted
● 159 Internal
error in
transmitter
3.2.7.9 Simulation events (1) If one of the selected events ap‐
pears this affects the status
icon, the related status output,
and the alarm on the communi‐
cation interface.
● 160 Mass flow
simulated
● 161 Volume
flow simulated
● 162 Density
simulated
● 163 Medium
temp.
simulated
● 164 Fraction
simulated
● 166 Std.
volume flow
simulated
● 167 Totalizer
1 simulated
● 168 Totalizer
2 simulated
● 169 Totalizer
3 simulated
● 170 Loop
current
simulated
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
430 Operating Instructions, 06/2017, A5E39789040-AA