Siemens FC300 - Page 431

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.2.7.10 Simulation events (2) If one of the selected events ap‐
pears this affects the status
icon, the related status output,
and the alarm on the communi‐
cation interface.
● 288 Frame
temperature
simulated
● 291 Pressure
simulated
● 292 Kin.
viscosity
simulated
● 298 Std.
volume flow
simulated
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 431