Siemens FC300 - Page 432

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.2.7.12 Input/output events (1) If one of the selected events ap‐
pears this affects the status
icon, the related status output,
and the alarm on the communi‐
cation interface.
● 192 Dosing
time overrun
● 193 Dosing
quantity
overrun
● 194 Invalid
proc. val.
During dosing
● 195 CH2 loop
cur. In lower
saturation
● 196 CH2 loop
cur in upper
saturation
● 197 CH2
cable break
● 198 CH2
output
frequency too
low
● 199 CH2
output
frequency too
high
● 200 CH2
pulse overflow
● 201 CH3 loop
cur. In lower
saturation
● 202 CH3 loop
cur in upper
saturation
● 203 CH3
cable break
● 204 CH3
output
frequency too
low
● 205 CH3
output
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
432 Operating Instructions, 06/2017, A5E39789040-AA