Siemens FC300 - Page 436

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.2.8.8 148 Transm. temp
above alarm limit
Transmitter temperature above
alarm limit
Standard:
● Process value
alarm
● Process value
warning
● Maintenance
alarm
● Maintenance
demanded
● Maintenance
required
● Function
check
● Process value
warning
● Maintenance
demanded
● Maintenance
required
● Function
check
Namur:
● Out of
specification
● Failure
● Maintenance
demanded
● Maintenance
required
● Function
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
436 Operating Instructions, 06/2017, A5E39789040-AA