Siemens FC300 - Page 443

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.4.3.5.3 Error status Error status - frequency
● Upper
saturation
● Lower
saturation
● Fail-safe
behaiviour
active
Read
only
3.4.3.5.3 Error status Error status - Current
● Upper
saturation
● Lower
saturation
● Fail-safe
behaviour
avtive
● Cable breal
● Loop current
deviation
Read
only
3.4.3.5.4 Pulse counter Actual value of output pulses Read
only
3.4.3.5.5 Reset pulse counter Status of the reset pulse counter Read
only
3.4.3.6 Channel 4 – relay
3.4.3.6.1 Digital output signal Actual value of status output. Read
only
3.5.1 Process values 1
3.5.1.1 Process value Selection of process value Disabled
● Disabled
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Media
temperature
● Standard
volume flow
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
● Control valve
User
3.5.1.2 Minimum Minimum value measured. Read
only
3.5.1.3 Timestamp at minimum Timestamp at minimum Read
only
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 443