Siemens FC300 - Page 444

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.5.1.4 Maximum Maximum value measured. Read
only
3.5.1.5 Timestamp at maximum Timestamp at maximum Read
only
3.5.1.6 Reset The peak values will be reset to
current values.
User
3.5.2 Process values 2
3.5.2.1 Process value Selection of process value Disabled
● Disabled
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Media
temperature
● Standard
volume flow
● Fraction A
● Fraction B
● Fraction A %
● Fraction B %
● Control valve
User
3.5.2.2 Minimum Minimum value measured. Read
only
3.5.2.3 Timestamp at minimum Timestamp at minimum Read
only
3.5.2.4 Maximum Maximum value measured. Read
only
3.5.2.5 Timestamp at maximum Timestamp at maximum Read
only
3.5.2.6 Reset The peak values will be reset to
current values.
User
3.5.3 Process values 3
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
444 Operating Instructions, 06/2017, A5E39789040-AA