Siemens FC300 - Page 452

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.8.1.5.3 Simulation value Enter the status output simula‐
tion value.
0
● 0
● 1
User
3.8.1.5.3 Simulation value Enter the status digital input sim‐
ulation value.
+
● 0
● 1
User
3.8.1.6 Channel 4 – relay
3.8.1.6.1 Simulation Enable or disable simulation of
relay output.
Disable
● Disable
● Enable
User
3.8.1.6.2 Simulation value Enter the relay output simulation
value.
0
● 0
● 1
User
Table B-39 Simulate process values
HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.8.2.1 Enable simulation
● Mass flow
● Volume flow
● Standard
volume flow
● Density
● Standard
density
● Medium
temperature
● Fraction A %
● Fraction B %
User
3.8.2.3 Mass flow
3.8.2.3.1 Simulation value 0
[kg/s]
User
3.8.2.4 Volume flow
3.8.2.4.1 Simulation value 0
[m3/h]
User
3.8.2.5 Standard volume flow
3.8.2.5.1 Simulation value 0
[normal m3/h]
-20 to +20 User
3.8.2.6 Density
3.8.2.6.1 Simulation value 1000
[kg/m3]
User
3.8.2.7 Fluid Temperature
3.8.2.7.1 Simulation value 0
[°C]
User
3.8.2.8 Frame Temperature
3.8.2.8.1 Simulation value 0
[°C]
User
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
452 Operating Instructions, 06/2017, A5E39789040-AA