Siemens FC300 - Page 451

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
3.8.1.2.3 Simulation value Enter the current output value
for simulation.
0.00 mA
● 0.00 to 25.00
mA
User
3.8.1.2.3 Simulation value Enter the frequency output sim‐
ulation value.
1 Hz
● 1 to 12500 Hz
User
3.8.1.2.3 Simulation value Enter the status output simula‐
tion value.
0
● 0
● 1
User
3.8.1.3 Channel 3 – input/output
3.8.1.3.1 Operation mode Select the input or output func‐
tionality you want the channel to
operate.
Off
● Current output
● Frequency
output
● Pulse output
● Status output
● Digital input
User
3.8.1.3.2 Simulation Enable or disable simulation of
digital input.
Disabled
● Disabled
● Enabled
User
3.8.1.3.3 Simulation value Enter the current output value
for simulation.
0.00 mA
● 0.00 to 25.00
mA
User
3.8.1.3.3 Simulation value Enter the frequency output sim‐
ulation value.
1 Hz
● 1 to 12500 Hz
User
3.8.1.3.3 Simulation value Enter the status output simula‐
tion value.
0
● 0
● 1
User
3.8.1.4 Channel 3 – relay
3.8.1.4.1 Simulation Enable or disable simulation of
relay output.
Disable
● Disable
● Enable
User
3.8.1.4.2 Simulation value Enter the relay output simulation
value.
0
● 0
● 1
User
3.8.1.5 Channel 4 – input/output
3.8.1.5.1 Operation mode Select the input or output func‐
tionality you want the channel to
operate.
Off
● Current output
● Frequency
output
● Pulse output
● Status output
● Digital input
User
3.8.1.5.2 Simulation Enable or disable simulation of
the current output.
Disabled
● Disabled
● Enabled
User
3.8.1.5.3 Simulation value Enter the current output value
for simulation.
0.00 mA
● 0.00 to 25.00
mA
User
3.8.1.5.3 Simulation value Enter the frequency output sim‐
ulation value.
1 Hz
● 1 to 12500 Hz
User
3.8.1.5.3 Simulation value Enter the pulse output simula‐
tion value.
1 Hz
● 1 to 12500 Hz
User
Default settings
B.9 Maintenance and diagnostics
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 451