Siemens FC300 - Page 469

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
4.2.8.2 Volume flow units Select volume flow unit for the
communication interface (vol‐
ume/time).
m³/h L/s, L/min, L/h, m³/
s, m³/min, m³/h,
m³/d, ML/d, Ugal/
s, Ugal/min, Ugal/
h, Ugal/d, bbl
(US)/s, bbl (US)/
min, bbl31/h,
bbl31/d, bbl42/s,
bbl42/min, bbl42/
h, bbl42/d, ft³/s, ft³/
min, ft³/h, ft³/d, gal/
s, gal/min, gal/h,
gal/d, Mgal/d,
Custom
User
4.2.8.3 Standard volume flow
units
Select Standard volume flow
unit for the communication inter‐
face (volume/time).
Sm³/h SL/s, SL/min, SL/
h, SL/d, Nm³/s,
Nm³/min, Nm³/h,
Nm³/d, SL/s, SL/
min, SL/h, SL/d,
Sft³/s, Sft³/min,
Sft³/h, Sft³/d, Sm³/
s, Sm³/min, Sm³/
h, Sm³/d, Custom
User
4.2.8.4 Fraction units Select fraction unit for the com‐
munication interface. Unit is not
applied at Local User Interface.
kg/h g/s, g/min, g/h, kg/
s, kg/min, kg/h, kg/
d, t/min, t/h, t/d, lb/
s, lb/min, lb/h, lb/
d, STon/min,
STon/h, STon/d,
T/h, T/d, Custom
User
4.2.8.5 Fraction units Select fraction unit for the com‐
munication interface. Unit is not
applied at Local User Interface.
m³/h L/s, L/min, L/h, m³/
s, m³/min, m³/h,
m³/d, ML/d, Ugal/
s, Ugal/min, Ugal/
h, Ugal/d, BBPS,
BBPM, BBPH,
BBPD, BOPS,
BOPM, BOPH,
BOPD, ft³/s, ft³/
min, ft³/h, ft³/d, gal/
s, gal/min, gal/h,
gal/d, Mgal/d,
Custom
User
4.2.8.8 Density units Select density unit for the com‐
munication interface (mass/vol‐
ume).
kg/m³ µg/L, µg/m³, mg/
L, g/mL, g/cm³, g/
L, kg/L, kg/m³, lb/
in³, lb/gal, lb/ft³,
STon/yd³, Custom
User
4.2.8.11 Temperature units Select temperature unit for the
communication interface.
°C °C, °F, °R, K User
Default settings
B.13 Communication
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 469