Siemens FC300 - Page 470

HMI menu ID Parameter Description Default value
[unit]
Value range Access
level
4.2.8.13 Totalizer 1 unit Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
kg g, kg, t, lb, STon,
oz, T
User
4.2.8.13 Totalizer 1 unit Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
L L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
User
4.2.8.13 Totalizer 1 unit Select Totalizer 1 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
SL SL, Nm³, SL, Sft³,
Sm³
User
4.2.8.14 Totalizer 2 unit Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
kg g, kg, t, lb, STon,
oz, T
User
4.2.8.14 Totalizer 2 unit Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
L L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
User
4.2.8.14 Totalizer 2 unit Select Totalizer 2 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
SL SL, Nm³, SL, Sft³,
Sm³
User
4.2.8.15 Totalizer 3 unit Select Totalizer 3 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
kg g, kg, t, lb, STon,
oz, T
User
4.2.8.15 Totalizer 3 unit Select Totalizer 3 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
L L, hL, m³, Ugal,
BL, BB, BO, in³,
ft³, yd³, gal, bush
User
4.2.8.15 Totalizer 3 unit Select Totalizer 3 unit for the
communication interface. Unit is
not applied at Local User Inter‐
face.
SL SL, Nm³, SL, Sft³,
Sm³
User
4.3.9 Damping
4.2.9.1 Damping value Define the damping filter time
constant.
0.0 s 0 to 100.0 s User
Default settings
B.13 Communication
MASS 2100 & FC300 (FCT030)
470 Operating Instructions, 06/2017, A5E39789040-AA