174/267
Building Technologies Basic documentation LMV37.4... CC1P7546en
25 Info level 17.12.2018
25 Info level
25.1 Display of info level
reset
1…3 s
Press
reset
until InFo appears.
When releasing
reset
, you are on the info level.
The info level displays information about the LMV37.4 and about operation in general.
Note
On the info level, you can press or to display the next or the previous parameter.
Instead of pressing , you can also press
reset
for <1 second.
Note
Press or
reset
for >8 seconds to return to the normal display.
P
Vh
min s %
Bild 27e/0807
Parameter
Parameter value
Figure 101: Info level
Note!
No change of values on the info level!
If the display shows .
_
.
_
below the parameter value, the
value may consist of more than 5 digits.
The value is displayed by pressing
reset
for >1 s and <3 s.
Press
reset
for >3 s or press
ESC
to return to the
selection of the parameter number (parameter no. flashes).
No. Parameter
Info level
167 Fuel volume resettable [m³, l, ft³, gal]
162 Operating hours resettable
164 Number of startups resettable
176 Switching back to pilot switching cycles
163 Operating hours when LMV37.4 is live
166 Total number of startups
113 Burner identification
107 Software version
108 Software variant
102 Identification date
103 Identification number
104 Preselected parameter set: Customer code
105 Preselected parameter set: Version
143 Reserved
End
To Next Page
Loading...
Need help?
General
