195/267
Building Technologies Basic documentation LMV37.4... CC1P7546en
27 Parameter level 17.12.2018
Adopt the value!
reset
ESC
Discard the change!
P
Vh
mi n
s%
Bild 81/0707
Press
reset
to return to editing mode.
The value set will be adopted.
P
Vh
mi n
s%
Bild 78/0707
Press
ESC
to return to the index.
Display: Parameter 501. does not flash,
index 01: flashes, value 0.0 has not
changed and does not flash.
Note
To detect potential display errors, the
value is displayed 1 place shifted to the
right.
Display: Value 1.0
ESC
P
Vh
mi n
s%
Bild 82/0707
Press
ESC
to return to the index.
PArAmeter 501: does not flash, index 01:
flashes, value 1.0 does not.
ESC
P
Vh
mi n
s%
Bild 83/0707
Press
ESC
to return to the parameter
level.
Display: Parameter 501. flashes, index 00:
and value 0.0 do not.
ESC
P
Vhmins%
Bild 75/0707
Press
ESC
to return to the parameter
level.
PArAmeter 500: for fuel-air ratio control.
To Next Page
Loading...
