Siemens SIMATIC ET 200eco PN - Page 103

General technical data
8.2 EMC compatibility, shipping and storage conditions
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
103
Emission of radio interference
Interference emission of electromagnetic fields according to EN 55016: Limit class A,
group 1 (measured at a distance of 10 m).
Frequency
Noise emission
30 MHz to 230 MHz
< 40 dB (µV/m)Q
230 MHz to 1000 MHz <47 dB (µV/m) Q
Shipping and storage conditions
The ET 200eco PN distributed I/O device surpasses the requirements according to
IEC 61131-2 for transport and storage conditions. The following information applies to
modules transported or stored in their original packaging.
Type of condition
Permissible range
Free fall
≤ 0.3 m
Temperature from -40 °C to +70 °C
Temperature change
20 K/h
Air pressure 1080 hPa to 660 hPa
(corresponds with an altitude of -1000 m to
3500 m)
Relative humidity
From 5% to 95%, without condensation