Siemens SIMATIC ET 200eco PN - Voltage distributor

Terminal block and voltage distributor
12.2 Voltage distributor
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
231
12.2
Voltage distributor
Article number
6ES7148-6CB00-0AA0
Properties
The voltage distributor PD DC 24V 1×7/8" 4×M12 has the following properties:
● It distributes the centrally fed supply voltage (7/8") to 4 connectors (M12).
● Integrated electronic short-circuit protection
● Direct connection of up to 4 I/O devices
● Distribution of 1L+ and 2L+
Pin assignment
The tables below show the pin assignments.
Table 12- 3 Pin assignment of the 7/8" connector as current input
Pin
Assignment
View of the 7/8" cable connector,
24 V connection
1
Ground 2M (switched)
2 Ground 1M (non-switched)
3
Functional earth FE
4
24 V (1L+ non-switched)
5 24 V (2L+ switched)
Table 12- 4 Pin assignment of the M12 connector as current output
Pin
Assignment
View of the M12 connection plug (front
view)
1
24 V (1L+ non-switched)
2
Ground 2M (switched)
3
Ground 1M (non-switched)
4
24 V (2L+ switched)
5 Not used