Configuring
4.10 SNMP
ET 200eco PN
76 Operating Instructions, 08/2016, A5E01250250-AJ
The interface module supports the SNMP Ethernet service. MIB-2 (RFC1213) is supported.
R/W objects can be edited using SNMP tools and are saved to module memory.
Following replacement with a brand new module, the R/W objects of the interface module
are set to factory settings.
SIMATIC PROFINET system description
(http://support.automation.siemens.com/WW/view/en/19292127
)
To Next Page
Loading...
