Siemens SIMATIC ET 200eco PN - I;O device analog output

I/O device analog input/analog output
10.2 I/O device analog output
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
195
10.2
I/O device analog output
10.2.1
I/O device 4 AO U/I 4xM12
Article number
6ES7145-6HD00-0AB0
Properties
● 4 outputs for voltage or current output
● Output ranges:
– ±10 V, resolution 15 bits + sign
– 1 to 5 V, resolution 15 bits
– 0 to 10 V, resolution 15 bits
– ±20 mA, resolution 15 bits + sign
– 4 to 20 mA, resolution 15 bits
– 0 to 20 mA, resolution 15 bits
● Supply voltage DC 24 V
● Dimensions 60 x 175 mm
● Diagnostics
– "Missing 1L+" supply voltage
– "Sensor supply short-circuit"
– "Wire break"
– "Short-circuit"
– "Overload"
● Parameterizable response to CPU/Master STOP
● Prioritized startup
● Media redundancy
Note
Incorrect intermediate values at the output are possible when supply voltage 1L+ is
switched o
n and off.
Note
The outputs are in voltage mode and supply a signal 0 V until the parameter assignment
becomes effective after switching on.