Siemens SIMATIC ET 200eco PN - I;O Device 8 DO DC 24 V;1.3 A 8 Xm12

I/O device digital inputs/digital outputs
9.2 I/O device digital outputs
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
131
9.2.3
I/O device 8 DO DC 24 V/1.3A 8xM12
Article number
6ES7142-6BG00-0AB0
Properties
The 8 DO DC 24V/1,3A 8×M12 I/O device has the following properties:
● 8 digital outputs
● Dimensions 60 x 175 mm, single assignment of the sockets
● Output current: 1.3 A per output
● Rated load voltage DC 24 V
● Suitable for solenoid valves, DC contactors, and indicator lights
● Diagnostics
– "Missing 1L+ or 2L+" for the I/O device
– "Wire break at outputs" per channel
– "Short-circuit to M at outputs" per channel
● Parameterizable response to CPU/Master STOP
● Prioritized startup
● Media redundancy
Pin assignment of the sockets
The table below shows the pin assignment of the eight sockets for connecting digital outputs.
Table 9- 6 Pin assignment of sockets X1 to X8 for digital outputs
Pin
Assignment
View of socket
(front view)
Socket X1
Socket X2
Socket X3
Socket X4
Socket X5
Socket X6
Socket X7
Socket X8
24 V (1L+ non-switched)
24 V (2L+ switched)
1
Not used
2
Not used
3
Ground 1M
Ground 2M
4 Output signal
DQ
0
DQ
1
DQ
2
DQ
3
DQ
4
DQ
5
DQ
6
DQ
7
5
Functional earth FE