Siemens SIMATIC ET 200eco PN - Parameter Overview Analog Input

I/O device analog input/analog output
10.1 I/O device analog input
ET 200eco PN
170 Operating Instructions, 08/2016, A5E01250250-AJ
10.1.3
Parameter overview analog input
Parameters for analog input 8 AI 4 U/I + 4 RTD/TC 8xM12 (6ES7144-6KD00-0AB0)
Parameters
Range of values
Default setting
Range of effectiveness
Group diagnostics
• Disable
• Enable
Disable Device
Diagnostics, missing 1L+
• Disable
• Enable
Disable Device
Diagnostics, sensor supply
short-circuit
• Disable
• Enable
Disable Device
Interference frequency sup-
pression
• OFF
• 60 Hz
• 50 Hz
• 10 Hz
50 Hz Device
Temperature unit
• Celsius
• Fahrenheit
• Kelvin
Celsius Channel groups 4 to 7
Reference temperature for TC
• -145.0 to 155.0 (Celsius)
• -229.0 to 311.0 (Fahrenheit)
• 128.2 to 428.2 (Kelvin)
0.0 Device
Measurement type, channels
0 to 3
• Disabled
• Voltage
• Current (4-wire transducer)
• Current (2-wire transducer)
Voltage Channel
Measurement type, channels
4 to 7
• Disabled
• Resistance (4-wire connection)
• Resistance (3-wire connection)
• Resistance (2-wire connection)
• Thermoresistor
(linear, 4-conductor connection)
• Thermoresistor
(linear, 3-conductor connection)
• Thermoresistor
(linear, 2-conductor connection)
• Thermocouple elements
• Voltage +/-80 mV
Thermoresistor Pt100
(4-conductor connec-
tion)
Channel