Siemens SIMATIC ET 200eco PN - General technical data; Standards and certifications

ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
99
General technical data
8
8.1
Standards and certifications
Introduction
The ET 200eco PN distributed I/O system satisfies the requirements and criteria of
IEC 61131-2.
Note
Information on the nameplate
You will find the currently valid labels and approvals on the type plate of the res
pective
product.
PROFINET IO
PROFINET IO is an open transmission protocol with real-time functionality defined in
PROFINET.
CE marking
Our products fulfill the requirements and safety objectives of the following EU Directives and
comply with the harmonized European standards (EN) published for programmable logic
controllers in the official journals of the European Community:
● 2014/30/EU "Electromagnetic compatibility" (EMC Guidelines)
● 2014/34/EU "Equipment and protective systems for use in hazardous areas" (Explosion
protection directive)
The EC Declarations of Conformity are kept available for the responsible authorities at:
Siemens Aktiengesellschaft
Sector Industry
DF FA AS DH AMB
Postfach 1963
D-92209 Amberg
These files are also available for download on the Customer Support Internet pages, under
"Declaration of Conformity".