Siemens SIMATIC ET 200eco PN - Page 100

General technical data
8.1 Standards and certifications
ET 200eco PN
100 Operating Instructions, 08/2016, A5E01250250-AJ
ATEX approval
in accordance with EN 60079-15 (Electrical apparatus for potentially explosive atmospheres;
Type of protection "n")
EN 60079-0 (Electrical apparatus for potentially explosive gas atmospheres - Part 0: General
Requirements) and
EN 60079-31 (Equipment dust ignition protection by enclosure "t")
For additional information, please refer to the Using the ET 200eco PN in hazardous area
Zone 2 / Zone 22 Product Information
(https://support.industry.siemens.com/cs/ww/en/view/80484830
).
RCM (C-Tick) Declaration of conformity for Australia/New Zealand
The ET 200eco PN distributed I/O system satisfies the requirements of the standards:
● AS/NZS 61000.6.4
● IEC 61000-6-4.
cULus approval
Underwriters Laboratories Inc. in accordance with
● UL 508 (Industrial Control Equipment)
● UL50 Enclosure Type 4X, indoor use only, watertight
● CSA C22.2 No. 142 (Process Control Equipment)
Note
Class 2 power supply unit
The components must be supplied with a class 2 power supply unit.