Siemens SIMATIC ET 200eco PN - Prioritized startup; Device replacement without programming device

Configuring
4.6 Prioritized startup
ET 200eco PN
74 Operating Instructions, 08/2016, A5E01250250-AJ
4.6
Prioritized startup
Prioritized startup
Prioritized startup denotes PROFINET functionality for accelerating the startup of IO Devices
for RT and IRT communication within a PROFINET IO system.
The function reduces the time that the correspondingly configured IO Devices require to
recover the cyclic exchange of user data in the following situations:
● After power has returned
● After station recovery
● After activation of IO Devices
Detailed information
For further information, see the SIMATIC PROFINET system description
(http://support.automation.siemens.com/WW/view/en/19292127
) System Manual and the
Migration from PROFIBUS DP to PROFINET IO
(
http://support.automation.siemens.com/WW/view/en/19289930) Programming Manual.
4.7
Device replacement without programming device
Device replacement without programming device
IO Devices having this function can be replaced easily:
● The device name does not have to be assigned using the programming device.
Instead of the programming device, the IO Controller now assigns the device name to the
replacement IO Device. The IO Controller uses the configured topology and the correlations
derived from the IO Devices. The configured target topology must agree with the actual
topology.
IO Devices that have already been in operation must be reset to factory settings before
before being put back into operation.
Detailed information
For further information, see the SIMATIC PROFINET system description
(http://support.automation.siemens.com/WW/view/en/19292127
) System Manual and the
Migration from PROFIBUS DP to PROFINET IO
(
http://support.automation.siemens.com/WW/view/en/19289930) Programming Manual.