Siemens SIMATIC ET 200eco PN - Wiring the terminal block

Wiring
3.7 Wiring the terminal block
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
59
3.7
Wiring the terminal block
Tools required
You need a medium-sized cross-tip screwdriver to screw on the terminal block and a slotted
screwdriver to press down the insulation displacement terminals.
Wiring the connectors
You do not have to strip the cables. They are striped automatically when you press down the
insulation displacement terminals.
Figure 3-4 Wiring the terminal block