Siemens SIMATIC ET 200eco PN - I;O Device 8 DI DC 24 V 8 Xm12

I/O device digital inputs/digital outputs
9.1 I/O device digital inputs
ET 200eco PN
112 Operating Instructions, 08/2016, A5E01250250-AJ
9.1.2
I/O device 8 DI DC 24 V 8xM12
Article number
6ES7141-6BG00-0AB0
Properties
The 8 DI DC 24V 8×M12 I/O device has the following properties:
● 8 digital inputs
● Dimensions 60 x 175 mm, single assignment of the sockets
● Rated input voltage DC 24 V
● Suitable for switches and proximity switches
● Diagnostics
– "Missing 1L+" for the I/O device
– "Short-circuit to M at sensor supply" per channel
– "Wire break", per channel
● Prioritized startup
● Media redundancy
Pin assignment of the sockets
The table below shows the pin assignment of the eight sockets for connecting the digital
inputs.
Table 9- 2 Pin assignment of sockets X1 to X8 for digital inputs
Pin
Assignment
View of socket
(front view)
Socket X1
Socket X2
Socket X3
Socket X4
Socket X5
Socket X6
Socket X7
Socket X8
1
24 V sensor supply 1U
S
(derived from 1L+ non-switched)
2
Not used
3 Sensor supply ground 1M
4
Input signal
DI
0
DI
1
DI
2
DI
3
DI
4
DI
5
DI
6
DI
7
5
Functional earth FE