Siemens SIMATIC ET 200eco PN - Page 101

General technical data
8.1 Standards and certifications
ET 200eco PN
Operating Instructions, 08/2016, A5E01250250-AJ
101
Industrial applications
SIMATIC products are designed for industrial applications.
Table 8- 1 Industrial applications
Fields of application
Requirements for
Noise emission
Interference immunity
Industry
EN 61000-6-4: 2007 + A1 2011
EN 61000-6-2:2005
Operation in residential areas
Note
The ET 200eco PN distributed I/O system is intended for use in i
ndustrial environments;
when used in residential areas, it can be affected by radio/television reception.
If you use the ET 200eco PN in residential areas, you must ensure the observance of limit
values according to EN 61000-6-3 with regard to the emission of interference.
Suitable measures for achieving the required Class B radio interference level include, for
example:
● Installation of ET 200eco PN in grounded control cabinets/control boxes
● Use of noise filters in the supply lines
Marine approval
Classification authorities:
● ABS (American Bureau of Shipping)
● BV (Bureau Veritas)
● DNVGL (Det Norske Veritas / Germanischer LIoyd)
● LRS (Lloyds Register of Shipping)
● Class NK (Nippon Kaiji Kyokai)